A cold autumn or winter morning? No longer a problem for you, because your vehicle is already ice-free and preheated. Either via a timer (not offered by us) or switched on manually, our fan heater ensures that the window is free of ice and that the interior of your vehicle is warm before you get in.

Now in a new version with a stable, robust connector and a new fan with improved mileage!

The alternative to auxiliary heating!
Ideal for cars, off-road vehicles, vans, mobile homes and buses with 12 volt on-board voltage. The fan heater stands on a rotary base and can therefore be adjusted by 360°. Connection only directly to the battery or the fuse box.

NO connection via the cigarette lighter!

Our 300 watt fan heater must be connected directly to the battery or fuse box. This is the only way to guarantee the required power consumption.

If connected via the cigarette lighter, the power cable of the cigarette lighter would become too hot and this could result in major damage or even a fire.

A connection via the cigarette lighter is only recommended up to a maximum of 120 watts. Fan heaters that are connected via the cigarette lighter usually do not deliver more than 80 - 120 watts. This just creates a "warm breeze".
 
Details:

• Width 140 mm x depth 175 mm x height 110 mm including base
• Special connector
• high performance fan
• Starting temperature fan heater: approx. 50° degrees
• Cable length: approx. 2.5 m.
• Cable with integrated 30 A plug-in fuse and connector for direct connection to the battery
• 360° rotary base (adjustable in lateral alignment and inclination)
• Heating and separate fan function
• Material inside: Polyamide 66 CF20 (high dimensional stability)
• On-board voltage: 12 volts
• Rated output at 12.8 volts (charged battery) approx. 18.5 amps (240 watts)
• Peak power at 13.8 volts (running engine or new battery)
• approx. 22 amps (300 watts)

The quick assembly / disassembly of the fan heater is done with a Velcro tape (see picture above), alternatively, the foot can also be screwed. Easy attachment of the fan heater to the adjustable stand (see picture above). Depending on the possibility, the cable can be routed through the interior into the engine compartment. The fan can be easily removed at any time using the connector plug. The connection is then made directly to the fuse box or the battery (see pictures above).

Several switch functions are available:

1. Switch up = fan/blower only
2nd switch down = heating with half fan speed
3. Both switches = full power heater / full fan

Instructions for use of the fan heater:

The fan heater should always be operated in a dry and heat-resistant location, only under supervision and out of the reach of children. It is important to ensure that the fan heater is kept away from easily flammable substances. The ventilation flaps must not be blocked

Replaces Part No: HA3185